Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
 
 Booth Greases
   E-Coat Cleaners
   Oven Cleaners
 
 Paint Booth Cleaning
   Paint Line Cleaners
   Protective Booth Coatings
   Peelable Booth Coatings
 
   Thickened Paint Strippers
 
   Tacky Booth Coatings
 
General Chemicals Corp
12336 Emerson Dr.Brighton
Michigan (MI) 48116, USA
USA: 866-623-5600
Overseas: 248-587-5600
Fax: 248-587-5606
Email:
Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
Paint Booth Coatings, Paint Booth Cleaning,Paint Booth Maintenance Chemicals
 
 
 
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner   General Chemical has complete line of Paint Booth Maintenance chemicals For Your Paint Spray Booths
 
 
UC-1421-A URETHANE CONDITIONER:
 
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner PRODUCT DESCRIPTION:
 
  Urethane Conditioner 1421-A is a water rinsable, solvent base conditioner that has been formulated to prevent two component (2K) clear coat overspray from bonding to various surfaces. The viscosity of the product has been adjusted to provide excellent vertical surface retention. The chemical composition of this formulation has been selected to provide the required surface protection while minimizing employee and environmental hazards.  
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner TYPICAL PROPERTIES:
 
Appearance: Thick, brown liquid
Flash Point:

130°F (minimum)
Viscosity: 2,400 – 3,200 cps
Specific Gravity: 0.89 – 0.92
 
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner RECOMMENDED APPLICATION:

Urethane Conditioner 1421-A can be sprayed or manually applied by brush. A uniform application will insure more consistent protection. The amount of material required will depend upon the area of use and anticipated amount of "2K" overspray. The “2K” urethane and 1421A is removed from the surface with an application of PC-47-LT-1 urethane paint stripper. The PC-47-LT-1 is allowed to penetrate the urethane and the conditioner, then rinsed with either high or low pressure water. In cases of severe build-up, higher water pressure rinses will yield better results.
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner PRODUCT ADVANTAGES:

Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner Contains no chlorinated solvent
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner Easy to apply
Paint booth cleaners, Thickened paint booth stripper, Urethane conditioner Water rinsable
 
     
  Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer's and seller's sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.  
     
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 STRIPPABLE COATINGS . ALL RIGHTS RESERVED